UH 500
UP 700
 
 

UP 700 Circular Swing-Blade Sawmill

  • The largest tilting circular sawmill
  • Max. Prism up to 24 x 24 cm
  • Easy operation and maintenance, reliable operation
  • Production of precision sawn timber directly from logs with just one machine
  • Max. Log diameter 1 m, max. Log length 12 m
  • Reliable 18.5 kW or 22 kW cast iron motors
  • Possibility to use saw blades from 450 mm up to 720 mm
Description
Parameters
COMPARISON
Download

 

The automatic dimensioning allows you to quickly and accurately adjust the cut range.

The speed and accuracy of the width and thickness adjustment of the cut-out is ensured by the control unit. The automatic turning of the saw blade by means of an electric motor with a gearbox is controlled by a frequency converter.

 

UP700

 

Control panel

 

UP700

 

Hydraulic control panel

 

 

Cutting cycle – forward horizontal cut, slowing and stopping of the saw at the end of the log, tilting the saw blade to the vertical position, cutting back, slowing and stopping the saw, tilting the saw blade to the horizontal position and setting the next pre-set size, also controls the control unit automatically.

Operator activity is maximally free of routine operations. The operator regulates the cutting speed and selects the cut dimensions depending on the quality of the wood, thus maximizing the efficiency of the wood mass.

 

The sawmill is equipped with clamping clamps as standard. Also available as optional accessories are trunk lifters to the trimming of the residual cut-outs.

 

UP700

 

Log loader for saw frame

 

UP700

 

"V" log turner with convergence function

 

 

UP700

 

Vertical Lift Clamp

 

UP700

 

Slide roller for longitudinal feed of the log

 

 

However, hydraulic handling of logs (loading, clamping, turning, aligning and centring) will also help to increase yield and change performance in addition to handling.

The two-arm "V" turner does not only serve to rotate the logs, but also to centre them on the clamping frame before clamping them. The turner makes it possible to raise the thinner end of the trunk to vertically position the trunk in its optimum position and compensate its convergence, which has great impact on the timber and yield of the cut.


STROJCAD RECOMMENDS


AUTOMATED CIRCULAR SAWMILLS WITH SAWN TIMBER SORTING
       
DOUBLE-BLADE CIRCULAR SAWMILL